Sharp Night Photography - Camera Perfectly Still

Online Photography School

Sharp Night Photography - Camera Perfectly Still

Learning how to begin taking photos at night is dependent on some very key photography practices. Taking photos in low light conditions, especially of the city, is a fantastic approach to get better in your shooting of long exposures. You must primarily learn how low light photography techniques work. Taking good photos at night needs a long shutter speed, a way to keep that camera rock steady and using aperture effectively. In this article I will not only tell you how to do it, but also give you some methods in which to start taking photos at night and have them turn out beautifully.



Why is it so significant for the camera to remain still and steady? When you take photos at night you normally want to include a very slow shutter speed with your shots. You must keep the camera dead still if you want a slow shutter speed and sharp images simultaneously. This is why strong support is necessary. When you take photos at night the first thing to aim for is sharpness. Being able to keep that camera secure is equally as important as the shutter speed and aperture.

You should consider buying a shutter release cable–an excellent piece of equipment that will improve your night photography. This cable is an elongated lead that attaches to your digital camera. At the other end is a small button that triggers the shutter to open and then close each time you press it. You need one of these so you don’t knock or touch the camera when working with a slow shutter speed. The smallest amount of movement can completely blur your photo. Without one of these handy little cords, you can create blur in your photo from the simple act of pressing the shutter button.

Taking night photos is possible to do without a cable. After I purchased my Canon 5D I was without the right shutter cable for my camera. Because I had just upgraded to a better camera, I was eager to begin taking photos at night time. This included the city skyline and astrophotography. I decided I would use the self-timer feature. I set it to two seconds. In the length of time it took to make the count down to zero, the vibration from pressing the shutter open would cease. When the cameras timer went off and the shutter opened, it gave the camera time to be still again.



Exposure bracketing can be enormously helpful. In my time as a photographer, every now and then, a photograph that I thought was overexposed was actually just right. This is the key reason why it is imperative to try different things. Put your shutter and f stop on a variety of speeds and just observe what happens. With practice and the right know-how you will be taking photos at night with ease.

About the Author:
Amy Renfrey